COMPACT & UTILITY TRACTORS
MOWING & LANDSCAPING
GATORS & SIDE-BY-SIDE VEHICLES
COMPACT CONSTRUCTION EQUIPMENT
AGRICULTURAL EQUIPMENT
FRONTIER EQUIPMENT
STIHL EQUIPMENT
HOME & WORKSHOP PRODUCTS
OTHER LINES
The V-style mainframe of the 995 Moldboard Plow distributes weight for good penetration.
The mainframe is made of high-strength 178-mm x 102-mm (7-in. x 4-in.) tubing that is 8-mm (5/16-in.) thick to handle the stress of high-horsepower tractors working in tough ground conditions.
All 995 Moldboard Plows use only one set of bottoms.
The moldboards are reversed laterally by a hydraulic cylinder that is standard equipment. There are several advantages of this design over traditional two-way roll-over plows with two sets of bottoms:
The integral hitch gives unexcelled maneuverability in turns and when parking in tight areas:
The front gauge wheels can be adjusted to limit the plowing depth to 356 mm (14 in.). They come equipped with 6.70-15 tires.
Two front and one rear gauge wheels are standard equipment on the 995 Moldboard Plow:
Compare >>>
Select up to 2 models to compare specifications
Steel shins are available as a field-installed option only.
The frog is pre-drilled at the factory to accept this attachment.
With this attachment, the steel shins will allow longer wear life when soil first comes into contact with the plow, but still offers the option of a plastic moldboard for sticky soil conditions.
Double landsides allow converting five- and six-bottom plows equipped with wedges for operation in hard ground conditions.
The bundle includes one extra set of landsides for the front bottoms, four regular large landsides for the rear bottom, and all necessary attaching hardware.
This bundle is for five- or six-bottom plows. It allows converting five- or six-bottom plows equipped with double landsides for operation in average-to-soft soil conditions.
The bundle includes a set of wedges for all bottoms, one set of extra-large landsides for the rear bottom, and all the necessary attaching hardware.
NOTE: Due to line-of-draft characteristics, the seven- and eight-bottom plows do not require use of wedges.
Front gauge wheels can be added to control the plowing depth.
Monthly Loan Payment:
Interest Paid:
Total of principal plus Interest:
**The accuracy of this calculator and its applicability to your circumstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.
All fields marked with * are required.
By clicking "Submit," I consent to receive emails, text messages, and phone calls, which may be recorded and/or sent using automated dialing or emailing equipment or software, unless I opt-out from such communications. I understand that my consent to be contacted is not a requirement to purchase any product or service and that I can opt out at any time. I acknowledge that message & data rates may apply, and that message frequency varies.
Don't show this again.