New 7500A E-Cut Hybrid

Specifications

Type	Direct Inject Turbocharged Diesel
Compliant emission regulation	United States and Canada Tier 4
Horsepower	Maximum rated horsepower At 2800 rpm ISOC: 31 kW At 2800 rpm ISOC: 41.6 hp
Cylinders	Three
Displacement	1.568 L 95.69 cu in.
Air cleaner	2-stage dry element
Fuel	Diesel
Cooling system	Liquid centrifugal pump; forward machine location for optimum cooling

Traction drive
Drive pump	N/A due to Electric Driven Cutting units
Cutting units drive
Hydraulic system capacity	45.4 L 12 U.S. gal.
Fuel tank capacity	60.6 L 16 U.S. gal.
Steering	Hydraulic power with double acting steering cylinder
Front drive tires	26.5x14-12 turf
Steering tires	20x12X10-8 turf
Ground pressure	69 kPa 10 psi
Brakes	Internal hydraulic wet disc brakes with dynamic braking through closed loop hydrostatic system
ROPS	Standard; meets ISO 21299 Standard

Cutting units lowered	1202 kg 2650 lb

Throttle	Automatic controls with AutoPedal foot controls; manual control through TechControl display
Forward/reverse	2-pedal
Mower lift	One-touch single handle
Parking brake	Electric Switch on Command Arm for Internal Wet Disk Brakes
Seat	Suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment
PTO	Electric Switch on Command Arm
Ignition
Work lights
Tilt steering	Left Foot operated for easy adjustment
Operator display
Storage

Height with ROPS	224 cm 88 in.
Length	323 cm 127 in.
Transport width	287 cm 113 in.
Mowing position width	295 cm 116 in.
Wheelbase
Ground speed	Mowing 0 to 12.8 km/h 0 to 8.0 mph 4WD mow speed 0 to 12.8 km/h 0 to 8.0 mph Transport 0 to 18.5 km/h 0 to 11.5 mph Reverse 0 to 6.4 km/h 0 to 5.0 mph

Number	Five
Size	Quick Adjust QA5: 55.9 cm 22 in.
Total width of cut	254 cm 100 in.
Height of cut	Construction 2.0 to 28.5 mm 0.078 to 1.125 in.
Frequency of clip (FOC Reels) or Blade tip speed (decks)	Rollers Front and rear: 51 mm 2 in. Optional: 76.2 mm 3 in. 11 Blade: 0.69 mm/km/h 0.044 in./mph 7 Blade: 1.09 mm/km/h 0.069 in./mph
Reel diameter	12.7 cm 5 in.
Bedknife adjustment
Backlapping

Operator ear full engine
Operator ear reduced engine rpm (2300 rpm)
Measuring standard	ISO 11201
Attachments installed	FTCs, reels engaged

Actual fuel usage will vary depending on course conditions, operation, turf and fuel quality	25% load: 2.8 L/hr 0.75 gph 40% load: 4.32 L/hr 1.14 gph 50% load: 5.22 L/hr 1.38 gph

Type	Two-year limited

Type	ANSI B71.4-2012

Accessories and Attachments